UHMWPE rod is a solid plastic bar made from ultra-high molecular weight polyethylene. It’s commonly used for wear components, rollers, guides, bushes, sprockets, and impact parts where low friction and extreme abrasion resistance are required.

UHMWPE rod offers outstanding abrasion resistance, very low coefficient of friction, excellent impact strength, and good chemical resistance. It does not absorb moisture and performs well in dirty, wet, or high-wear environments where other plastics fail.

UHMWPE rod is available in 20 – 300mm diameters, from small precision sizes to large industrial sections. Rods are typically supplied in standard stock lengths and can be cut to length. Availability varies by diameter and grade.

Yes. UHMWPE rod can be turned, milled, drilled, and machined using standard plastic or woodworking tools. Due to its flexibility and tendency to move under load, sharp tools and correct machining parameters are important for accuracy.

UHMWPE rod is suitable for outdoor applications, particularly in abrasive or wet conditions. For prolonged UV exposure, UV-stabilised or black grades are recommended, as natural grades can degrade over time in direct sunlight.

UHMWPE rod offers far superior abrasion resistance and lower friction than HDPE or nylon. However, it has lower stiffness and higher thermal expansion, making it less suitable for tight tolerances or high structural loads.

UHMWPE rod typically operates between approximately -150°C and +80°C. It maintains toughness at very low temperatures but softens at elevated temperatures, limiting use in high-heat environments.